Script: Netware: Set Parameters

Save these settings as a .ncf file and run it to set all these settings:

### Netware 6.5 Server Tuning & Parameters
###

### TID 10012765 Tuning prior to Netware 5.x
### TID 10018661 TCPIP Tuning
### TID 10096649 Memory Fragmentation & Tuning
### TID 10091980 Memory Fragmentation

### Miscellaneous
SET MINIMUM SERVICE PROCESSES = 250
SET MAXIMUM SERVICE PROCESSES = 1000

### Communication
SET MINIMUM PACKET RECEIVE BUFFERS = 2000
SET MAXIMUM PACKET RECEIVE BUFFERS = 10000

### Common File System
SET Maximum Concurrent Directory Cache Writes = 150

### Novell Storage System
###
### Use these setting only if servers have only
### NSS volumes and enough memory (> 2 GB)
###
SET NSS MINIMUM CACHE BUFFERS = 20000
SET NSS MINIMUM OS CACHE BUFFERS = 20000
SET NSS MAXIMUM CACHE BALANCE BUFFERS PER SESSION = 20000
###
### Use these settings always
###
SET NSS CLOSED FILE CACHE SIZE = 100000
SET NSS LOW VOLUME SPACE ALERTS = ON
SET NSS LOW VOLUME SPACE WARNING RESET Threshold = 150
SET NSS LOW VOLUME SPACE WARNING Threshold = 100

### Traditional File System
SET DIRECTORY CACHE ALLOCATION WAIT TIME = 0.5
SET MAXIMUM DIRECTORY CACHE BUFFERS = 4000
SET Dirty Disk Cache Delay Time = 0.5
SET Maximum Concurrent Disk Cache Writes = 1000
SET minimum directory cache buffers = 1000

### SLP Parameters
SET SLP Cache Timeout = 1800
SET SLP Enable UA Multicast = OFF
SET SLP Register nwserver = ON
SET SLP nwserver NLM names = OFF
SET SLP Scope List = SHIFT-SCOPE
SET SLP Static Scope List = ON
SET SLP DA Discovery Options = 6
SET SLP Broadcast = OFF
SET NCP over UDP = ON

### Time Parameters
SET TIMESYNC Configured Sources = ON
SET TIMESYNC DEBUG = 7
SET TIMESYNC Polling Count = 3
SET TIMESYNC Polling Interval = 600
SET TIMESYNC Synchronization Radius = 2000
SET TIMESYNC Time Sources = TIME1.SHIFT.NET:123; TIME2.SHIFT.NET:123
SET TIMESYNC Type = SECONDARY