This is a notes page, extended with tips & tricks. This page is not really documentation, just stuff for me to remember. Sometimes things will get removed from these pages and turned into real documentation, sometimes not. You might find these notes to come in hand, maybe not. For me, it's just things I don't want to forget.

• zfdstart.ncf:

#ZENworks WakeOnLan Settings
#startWOL.ncf


SEARCH ADD SYS:\JAVA\NJCLV2\BIN
LOAD JAVA.NLM
load nwsnut
cls


SYS:\system\zenWSImp.ncf
SYS:\system\zenWSRem.ncf
SYS:\system\pxeStart.ncf
load SYS:\system\imgserv

• pxestart.ncf:

load SYS:\system\tftp
load SYS:\system\pdhcp
load SYS:\system\dts

###
### S. Hooft - <sjoerd_@_warmetal_nl>
###
### Commands to reload ZENworks pdhcp:
### unload pdhcp
### load pdhcp
###
#
#    SYS:SYSTEM\pdhcp.ini
#
#    Configuration file for the ZENworks Preboot Proxy DHCP server
#
#    VERBOSE=1 Use logging on the console
# VERBOSE=0
#

# Fill in the IP-address of the dts server in case it's not running on this server
# TRANSACTION_SERVER_IP=10.10.100.100

# Fill in the IP-address of the tftp server in case it's not running on this server
# TFTP_SERVER_IP=196.10.229.1

# Fill in the IP-address of the nic in the server where to bind to (multihomed server)
# PDHCP_Server_IP=10.10.10.10

# Set to 0 if the DHCP and PDHCP services are both running on this server, otherwise set to 1
USE_DHCP_PORT=0
# Use the BINL port (4011) in stead of the DHCP port
USE_BINL_PORT=1

#---------------------------------------------------------------------------
# PXE specific options
#---------------------------------------------------------------------------

# Boot menu showtime - do not change
#BOOT_MENU_TIMEOUT=1

# Multicast transfers are disabled - do not change
#USE_MTFTP=0
#MTFTP_IP=234.0.0.0
#MTFTP_SERVER_PORT=360
#MTFTP_CLIENT_PORT=1000
#MTFTP_OPEN_TIMEOUT=2
# Keep this parameter enabled - do not change
MTFTP_REOPEN_TIMEOUT=2

# end of file

#---------------------------------------------------------------------------
# This is the configuration file for the ZENworks Preboot Proxy DHCP server.
#
# By default all the options in this configuration file are commented out.
# For most installations this is the correct configuration.
#
#---------------------------------------------------------------------------

# Setting VERBOSE to 1 will cause the server to write additional configuration
# information to the console as it starts.
#VERBOSE=0

#---------------------------------------------------------------------------
# IP ADDRESS SETTINGS
#
# When an option is NOT specified in this file, the server will automatically
# supply the server IP address to a PXE client.
# In the case of a multihomed server the Proxy DHCP server will supply the
# server IP address of the network adapter that received the request.
#
# If the Proxy DHCP server is running on a different server to the
# Transaction and TFTP servers, then uncomment the relevant fields and set
# them to the IP address of the server running Transaction server (DTS.NLM)
# and TFTP server (TFTP.NLM).
#---------------------------------------------------------------------------

# The Preboot client will contact the server on this IP address to check for
# imaging work.
#TRANSACTION_SERVER_IP=196.10.229.76

# The PXE/Preboot client will contact the server on this IP address to
# download the Preboot client (dinic.sys) and the Imaging engine if
# imaging work is required.
#TFTP_SERVER_IP=196.10.229.1

# If set the Proxy DHCP server will try to bind to this IP address on the
# server.
# The IP address set must be a valid IP address on the server.
# This setting can be used to force the PDHCP server to respond on only one
# interface on a multihomed server.
#PDHCP_Server_IP=10.10.10.76

# Should the Proxy DHCP server listen on the dhcp port 67
USE_DHCP_PORT=0
# Should the Proxy DHCP server listen on the dhcp port 4011
USE_BINL_PORT=1

#---------------------------------------------------------------------------
# PXE specific options
#---------------------------------------------------------------------------

# This settings controls how long the PXE boot menu is displayed as
# a PXE workstation boots.
#BOOT_MENU_TIMEOUT=1

# Set this option to 0 to disable multicast TFTP transfers.  This is the
# default setting.
# Set this option to 1 to enable multicast TFTP transfers.  In this mode
# the PXE client will wait to join a multicast group for the transfer of
# the initial dinic.sys file.  Enabling this option will add 10 to 20
# seconds to the PXE boot up sequence, so this is not recommended.
#USE_MTFTP=0

# This value specifies the multicast IP that the server should use for
# MTFTP transfers.
#MTFTP_IP=234.0.0.0

#This value specifies the server port to use for MTFTP transfers.
#MTFTP_SERVER_PORT=360

#This value specifies the client port to use for MTFTP transfers.
#MTFTP_CLIENT_PORT=1000

# Sets the time to wait before opening the MTFTP session.
#MTFTP_OPEN_TIMEOUT=2

# Sets the time to wait before reopening the MTFTP session.
MTFTP_REOPEN_TIMEOUT=2

# end of file